- NEST Users - NEST Initiative Mail

Multi-compartmental models
by benediktr＠hotmail.de 19 Feb '20

19 Feb '20

Dear nest developer, Is there a pre-implemented nest model allowing multiplicative aggregation of compartments/dendritic branches. I am looking for a model that will allow multiplicative aggregation of two dendritic branches at the soma. I very much appreciate any support provided. Best regards, Benedikt

4 3

nest::BadProperty error that behaves like a OOM error
by angpap＠kth.se 17 Feb '20

17 Feb '20

Hello, I am fairly new to NEST and I have been struggling with the following issue. Github repo: https://github.com/angpapadi/wm-net My simulation code consists of 3 python files: - sim.py, the main simulation script, where the model is built and the simulation program is specified - helpers.py a collection of helper functions - parameters.py a script where all parameters are specified. In order to be able to run the code successfully, I have to set certain parameters to unrealistic values. If I try to move any of these parameters towards a more realistic regime, NEST crashes (see end of post for full error message). Most relevant is the fact that setting these parameters to more reasonable values, increases by a lot the amount of spikes that NEST has to keep track of. Examples of such parameters that currently have wrong values: > the DOWNSCALE_FACTOR, that essentially controls the neural network's size. Right now my network size is downscaled 95% of what I would want it to be. There are 2 hypercolumns with 4 minicolumns each. Each minicolumn consists of 4 neurons. > E_rev is a list of the reversal potential for each synaptic port. My neuron model has 3 synaptic ports for AMPA, NMDA and GABA, in that order. The Erev for GABA is correctly set but for AMPA and NMDA I cannot get it to work for values bigger than -25, when the correct reversal potential for both is 0. I cannot find the issue with my code, if there is any. When the simulation is very limited (the aforementioned parameters are set to unrealistic values), the code runs flawlessly and produces the expected plots and spike rasters. Also, if I allocate more resources by running on multiple mpi processes, I can be slightly closer to the correct parameter ranges before the nest::badproperty error occurs. To reproduce the error: 1. You can optionally first run the code as is to verify that it works (by running the sim.py script) 2. Then try setting one of the parameters mentioned above to a more plausible value. You can do so by going to the parameters.py file and either reducing the DOWNSCALE_FACTOR parameter (line 7) or increasing the first two entries of the E_rev list (line 203) that correspond to the AMPA and NMDA reversal potentials, or doing both if you 're feeling adventurous! The error is the following: terminate called after throwing an instance of 'nest::BadProperty' what(): BadProperty [59eb791543aa:00113] *** Process received signal *** [59eb791543aa:00113] Signal: Aborted (6) [59eb791543aa:00113] Signal code: (-6) [59eb791543aa:00113] [ 0] /lib/x86_64-linux-gnu/libc.so.6(+0x3ef20)[0x7f2c117b7f20] [59eb791543aa:00113] [ 1] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0xc7)[0x7f2c117b7e97] [59eb791543aa:00113] [ 2] /lib/x86_64-linux-gnu/libc.so.6(abort+0x141)[0x7f2c117b9801] [59eb791543aa:00113] [ 3] /usr/lib/x86_64-linux-gnu/libstdc++.so.6(+0x8c957)[0x7f2c0a55a957] [59eb791543aa:00113] [ 4] /usr/lib/x86_64-linux-gnu/libstdc++.so.6(+0x92ab6)[0x7f2c0a560ab6] [59eb791543aa:00113] [ 5] /usr/lib/x86_64-linux-gnu/libstdc++.so.6(+0x91b19)[0x7f2c0a55fb19] [59eb791543aa:00113] [ 6] /usr/lib/x86_64-linux-gnu/libstdc++.so.6(__gxx_personality_v0+0x2a8)[0x7f2c0a560488] [59eb791543aa:00113] [ 7] /lib/x86_64-linux-gnu/libgcc_s.so.1(+0x10613)[0x7f2c0d6f1613] [59eb791543aa:00113] [ 8] /lib/x86_64-linux-gnu/libgcc_s.so.1(_Unwind_Resume+0x125)[0x7f2c0d6f1e95] [59eb791543aa:00113] [ 9] /opt/nest/lib/python3.6/site-packages/nest/../../../libnestkernel.so(_ZN4nest20EventDeliveryManager18gather_spike_data_INS_9SpikeDataEEEviRSt6vectorIT_SaIS4_EES7_+0x10ed)[0x7f2c0af0684d] [59eb791543aa:00113] [10] /opt/nest/lib/python3.6/site-packages/nest/../../../libnestkernel.so(+0xf4894)[0x7f2c0aee4894] [59eb791543aa:00113] [11] /usr/lib/x86_64-linux-gnu/libgomp.so.1(GOMP_parallel+0x3f)[0x7f2c08d79ecf] [59eb791543aa:00113] [12] /opt/nest/lib/python3.6/site-packages/nest/../../../libnestkernel.so(_ZN4nest17SimulationManager7update_Ev+0x151)[0x7f2c0aee0f61] [59eb791543aa:00113] [13] /opt/nest/lib/python3.6/site-packages/nest/../../../libnestkernel.so(_ZN4nest17SimulationManager12call_update_Ev+0x5a5)[0x7f2c0aee1915] [59eb791543aa:00113] [14] /opt/nest/lib/python3.6/site-packages/nest/../../../libnestkernel.so(_ZN4nest17SimulationManager3runERKNS_4TimeE+0x1d3)[0x7f2c0aee6713] [59eb791543aa:00113] [15] /opt/nest/lib/python3.6/site-packages/nest/../../../libnestkernel.so(_ZN4nest17SimulationManager8simulateERKNS_4TimeE+0x1c)[0x7f2c0aee699c] [59eb791543aa:00113] [16] /opt/nest/lib/python3.6/site-packages/nest/../../../libnestkernel.so(_ZN4nest8simulateERKd+0xc2)[0x7f2c0aecb972] [59eb791543aa:00113] [17] /opt/nest/lib/python3.6/site-packages/nest/../../../libnestkernel.so(_ZNK4nest10NestModule16SimulateFunction7executeEP14SLIInterpreter+0x43)[0x7f2c0ae97a53] [59eb791543aa:00113] [18] /opt/nest/lib/python3.6/site-packages/nest/../../../libsli.so(_ZN13FunctionDatum7executeEP14SLIInterpreter+0x43)[0x7f2c0a8e9063] [59eb791543aa:00113] [19] /opt/nest/lib/python3.6/site-packages/nest/../../../libsli.so(_ZN14SLIInterpreter8execute_Em+0x222)[0x7f2c0a8e6d42] [59eb791543aa:00113] [20] /opt/nest/lib/python3.6/site-packages/nest/../../../libsli.so(_ZN14SLIInterpreter7executeERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEE+0x15e)[0x7f2c0a8e72be] [59eb791543aa:00113] [21] /opt/nest/lib/python3.6/site-packages/nest/pynestkernel.so(+0x29ac8)[0x7f2c0c5caac8] [59eb791543aa:00113] [22] python[0x50a94c] [59eb791543aa:00113] [23] python(_PyEval_EvalFrameDefault+0x449)[0x50c5b9] [59eb791543aa:00113] [24] python[0x509d48] [59eb791543aa:00113] [25] python[0x50aa7d] [59eb791543aa:00113] [26] python(_PyEval_EvalFrameDefault+0x449)[0x50c5b9] [59eb791543aa:00113] [27] python[0x508245] [59eb791543aa:00113] [28] python[0x589471] [59eb791543aa:00113] [29] python(PyObject_Call+0x3e)[0x5a067e] [59eb791543aa:00113] *** End of error message *** Let me know if you need any additional information and I thank you for your time Angeliki

4 6

Open NEST Developer Video Conference Monday 17 February 2020 11:30 CET (UTC+1)
by Dennis Terhorst 17 Feb '20

17 Feb '20

Dear NEST Users & Developers! I would like to invite you to our next bi-weekly Open NEST Developer Video Conference, today Monday 17 February, 11.30-12.30 CET (UTC+1). For details how to log in see below. As usual the agenda for this meeting is also available online, see https://github.com/nest/nest-simulator/wiki/2020-02-17-Open-NEST-Developer-… Agenda * Welcome * Review of NEST User Mailing List * Review of open Github Pull Request * Review of open Github Issues Looking forward to seeing you soon! best, Dennis Terhorst ------------------ Log-in information ------------------ We use a virtual conference room provided by DFN (Deutsches Forschungsnetz). You can use the web client to connect. We however encourage everyone to use a headset for better audio quality or even a proper video conferencing system (see below) or software when available. Web client * Visit https://conf.dfn.de/webapp/conference/97938800 * Enter your name and allow your browser to use camera and microphone * The conference does not need a PIN to join, just click join and you're in. In case you see a dfnconf logo and the phrase "Auf den Meetingveranstalter warten", just be patient, the meeting host needs to join first (a voice will tell you). VC system/software How to log in with a video conferencing system, depends on you VC system or software. - Using the H.323 protocol (eg Polycom): vc.dfn.net##97938800 or 194.95.240.2##97938800 - Using the SIP protocol:97938800@vc.dfn.de - By telephone: +49-30-200-97938800 For those who do not have a video conference system or suitable software, Polycom provides a pretty good free app for iOS and Android, so you can join from your tablet (Polycom RealPresence Mobile, available from AppStore/PlayStore). Note that firewalls may interfere with videoconferencing in various and sometimes confusing ways. For more technical information on logging in from various VC systems, please see http://vcc.zih.tu-dresden.de/index.php?linkid=1.1.3.4

1 0

Neuron Model for a Generalized LIF Neuron (No alpha or exponential shaped psc)
by shanka19＠purdue.edu 14 Feb '20

14 Feb '20

Hello NEST Users, I wanted to create a neural network with generalized LIF Neurons. I do not want any exponential or alpha shaped PSCs. Since I cannot draw to describe its shape, I am posting a link from google images to help understand what I mean by a generalized LIF. https://www.google.com/url?sa=i&url=https%3A%2F%2Fwww.researchgate.net%2Ffi… Thanks in advance!

4 5

Realtime access to spikes in simulation
by Benjamin Staude 04 Feb '20

04 Feb '20

Hi NEST-Team, To use the NEST-Simluator in an interactive installation, I would need to 1) have access to the spike in the network in realtime, and 2) send signals (spikes) to neurons in the simulation in realtime. For 1), I could imagine writing the spike-times to a file and then reading that file while the simulation is running. However, I currently don’t see an option for 2). Then I heard that you are actually working on module that would enable realtime I/O-access. Is that the case? And, if so, is there a timeline? Best, Benjamin -- -- -- Dr. Benjamin Staude | Paul-Lincke-Ufer 7 | 10999 Berlin | benjamin.staude(a)gmail.com

3 4

Stop Printing Simulation Details on Terminal (NEST)
by shanka19＠purdue.edu 04 Feb '20

04 Feb '20

Hi, I wanted to know how to stop printing the simulation details on my terminal window. For instance I can see the number of open mpi process, simulation time being printed every time I run a model. I do not want to see the details on my terminal screen, is there a way to do it?

2 1

Using GPU's to run NEST simulaton
by Daphne Cornelisse 04 Feb '20

04 Feb '20

Hi NEST-team, I would like to run a simulation of > 1000 neurons, and to make my computing time faster I am looking into how to use parallel computing with NEST. I have seen this <https://www.nest-simulator.org/parallel-computing/> page but I can't seem to find anything about using the cloud (e.g. google cloud, colab etc.) and the use of GPU's. I am quite new to this so it could be I missed something. - Is it possible to use a GPU for the nest simulations? - Are the some resources I could learn from? Thank you! Best, Daphne

4 4

NEST 2.20.0 released / Issue 1394 / NEST 3 to become Master Branch soon
by Hans Ekkehard Plesser 31 Jan '20

31 Jan '20

Dear NEST Users! We are very excited about the release of NEST 2.20.0 earlier today, including 454 commits in 82 pull requests by 25 developers since NEST 2.18.0. NEST 2.20.0 brings a wide range of improvements, including * generalized leaky integrate-and-fire neuron models developed by the Allen Institute (Teeter et al, 2018) * STDP synapses with nearest-neighbor spike paring schemes * improved documentation on Read The Docs<https://nest-simulator.readthedocs.io/en/latest/>. Please see below for a complete list of changes. NEST 2.20.0 is available for download from https://github.com/nest/nest-simulator/releases/tag/v2.20.0 To cite NEST 2.20.0, please refer to the Zenodo entry at https://doi.org/10.5281/zenodo.3605514 WARNING: NEST 2.20.0 is affected by issue #1394<https://github.com/nest/nest-simulator/issues/1394>, which may lead to incorrect results under certain circumstances when simulating very large networks across many MPI processes and threads. Simulations using only MPI parallelism, but no threads, work correctly according to our tests. The same holds for simulations using only thread-parallelism. The issue also affects NEST 2.18.0 and 2.16.0, but not 2.14.0. According to our analysis, in affected simulations, a very small number of connections is not created correctly. This happens under random cirucmstances, so that in one series of tests, out of ten identical simulations, five simulations produced correct results, while the remaining five simulations produced different results. For details, please follow the issue on GitHub. We are currently working hard to identify the cause of this issue and hope to be able to provide a fix soon. The next big step forward in NEST development will be the merge of the nest-3 development branch into the master branch on GitHub. NEST 3 will bring major improvements to the user interface and considerable changes under the hood. Please see https://nest-simulator.readthedocs.io/en/nest-3/guides/from_nest2_to_nest3.… https://nest-simulator.readthedocs.io/en/nest-3/ref_material/nest2_vs_3.html for more information on changes to come and modifications required to existing scripts. Best regards, Hans Ekkehard Plesser President, The NEST Initiative ------------------------------------------------ NEST 2.20.0<https://doi.org/10.5281/zenodo.3605514> is the result of 454 commits in 82 pull requests by 25 developers since NEST 2.18.0<https://doi.org/10.5281/zenodo.2605422> which was released on June 7, 2019. This release wraps up the 2.x series of NEST and contains many improvements and bug fixes. Highlights are the addition of the generalized leaky integrate-and-fire neuron models by the Allen Institute<https://portal.brain-map.org/explore/models/glif-single-neuron>, STDP synapses with nearest-neighbor spike pairing schemes and improved documentation, available on Read The Docs<https://nest-simulator.readthedocs.io/en/latest/>. Following is a list of all merged pull requests: Enhancements Models * Add STDP synapses with nearest-neighbor spike pairing schemes<https://github.com/nest/nest-simulator/pull/865> * Add generalized leaky integrate-and-fire (GLIF) neuron models by Allen Institute<https://github.com/nest/nest-simulator/pull/1126> * Add iaf_psc_alpha_ps neuron model<https://github.com/nest/nest-simulator/pull/1169> Installation * Add conda-forge installation documentation for Linux and MacOSX<https://github.com/nest/nest-simulator/pull/1204> * Add Fugaku platform CMake file<https://github.com/nest/nest-simulator/pull/1231> * Clean the build process for the NEST Debian packages<https://github.com/nest/nest-simulator/pull/1316> * Hike minimum required CMake to 3.12 and add support for OpenMP with Apple Clang<https://github.com/nest/nest-simulator/pull/1386> * More informative compiler information in CMake summary<https://github.com/nest/nest-simulator/pull/1403> Documentation * Added initial membrane potential options to microcircuit example<https://github.com/nest/nest-simulator/pull/1206> * Add initial membrane potential options to microcircuit example<https://github.com/nest/nest-simulator/pull/1260> * Add new options for installation and improve instructions for NEST<https://github.com/nest/nest-simulator/pull/1262> * Updated/extended macOS install instructions<https://github.com/nest/nest-simulator/pull/1297> * Update DOI and release buttons in README; add Zenodo reference to NEST 2.18.0<https://github.com/nest/nest-simulator/pull/1314> * Add link on website to new PyNEST templates and update citations<https://github.com/nest/nest-simulator/pull/1351> * Provide guidelines to writing to mailing list in documentation<https://github.com/nest/nest-simulator/pull/1368> Kernel * Introduce time-driven spiking connections<https://github.com/nest/nest-simulator/pull/1160> * Add support for sending secondary events to and from devices<https://github.com/nest/nest-simulator/pull/1244> * Add warning about invalid connection descriptors when new connections are created<https://github.com/nest/nest-simulator/pull/1250> * Use an unsigned data type for thread in spike data<https://github.com/nest/nest-simulator/pull/1308> Infrastructure * Fast static check in Travis CI<https://github.com/nest/nest-simulator/pull/1267> PyNEST * New templates for pynest examples and api<https://github.com/nest/nest-simulator/pull/1139> * Add getattr/setattr to GIDCollection<https://github.com/nest/nest-simulator/pull/1249> * Allow specifying arrays of values in the synapse specification when connecting with fixed_total_number<https://github.com/nest/nest-simulator/pull/1266> * Use shape as argument instead of columns/rows/depth and update topology examples to NEST3<https://github.com/nest/nest-simulator/pull/1287> Bug fixes Models * Fix uninitialized variable in iaf_psc_exp<https://github.com/nest/nest-simulator/pull/1225> * Fix handling of rate change in poisson_generator_ps<https://github.com/nest/nest-simulator/pull/1280> Documentation * Remove spurious brackets from code example in tutorial<https://github.com/nest/nest-simulator/pull/1270> * Fix MUSIC example<https://github.com/nest/nest-simulator/pull/1312> Kernel * Fix multiple definition of rho build complain observed on AArch64 with FCC<https://github.com/nest/nest-simulator/pull/1233> * Fix GetConnections to correctly get connections where the target is a global receiving device<https://github.com/nest/nest-simulator/pull/1251> * Fix logical error in elseif-statements in connect functions<https://github.com/nest/nest-simulator/pull/1254> * Check variables of GSL binomial random generator where they are set<https://github.com/nest/nest-simulator/pull/1299> * Ensure number of connections for fixed total number is properly set<https://github.com/nest/nest-simulator/pull/1367> * Fix MyModule by incorporating modelsmodule refactoring from #1069<https://github.com/nest/nest-simulator/pull/1383> * Avoid segfault when using a weight recorder with a probabilistic synapse<https://github.com/nest/nest-simulator/pull/1402> Infrastructure * Fix cppcheck in Travis CI testsuite<https://github.com/nest/nest-simulator/pull/1306> Maintenance Models * Fix namespaces in Hodgkin-Huxley neuron models<https://github.com/nest/nest-simulator/pull/1256> * Make multimeter and voltmeter class names lower case<https://github.com/nest/nest-simulator/pull/1345> Installation * Fix nest_vars in case of undefined PYTHONPATH<https://github.com/nest/nest-simulator/pull/1218> * Cleanup for the K computer specific CMake file for v2.18<https://github.com/nest/nest-simulator/pull/1228> * Fix up dependencies in Ubuntu install instructions<https://github.com/nest/nest-simulator/pull/1230> * Files needed to build Debian packages (.deb)<https://github.com/nest/nest-simulator/pull/1255> * Fix extraction of version number if sources are inside another Git repository<https://github.com/nest/nest-simulator/pull/1362> * Let uninstall of NEST Debian package also delete script in profile.d<https://github.com/nest/nest-simulator/pull/1363> Interpreter * Remove handling of external POSIX signals sent to NEST<https://github.com/nest/nest-simulator/pull/1385> Documentation * Convert topology user manual to ReStructuredText<https://github.com/nest/nest-simulator/pull/1214> * Update links to model directory in docs<https://github.com/nest/nest-simulator/pull/1227> * Documentation update pertaining to maximum line length<https://github.com/nest/nest-simulator/pull/1234> * Fix PyNEST installation instructions<https://github.com/nest/nest-simulator/pull/1240> * Update download page for 2.18 and conda-forge<https://github.com/nest/nest-simulator/pull/1247> * Correct typo in random number documentation<https://github.com/nest/nest-simulator/pull/1268> * Fix PyNEST API generation for documentation using mock<https://github.com/nest/nest-simulator/pull/1274> * Add updated NEST examples to Read The Docs <https://github.com/nest/nest-simulator/pull/1277> * Replace iaf_neuron by iaf_psc_alpha in MUSIC tutorial<https://github.com/nest/nest-simulator/pull/1330> * Autogenerate PyNEST examples from source with sphinx_gallery<https://github.com/nest/nest-simulator/pull/1336> * Update syntax formatting for terms in documentation<https://github.com/nest/nest-simulator/pull/1343> * Fix broken CSS style<https://github.com/nest/nest-simulator/pull/1344> * Update mailing list email address<https://github.com/nest/nest-simulator/pull/1346> * Small typographical updates to user documentation<https://github.com/nest/nest-simulator/pull/1397> Kernel * Refactor registration of models in modelsmodule<https://github.com/nest/nest-simulator/pull/1069> * Increase maximum line length in source code formatting style from 80 to 120<https://github.com/nest/nest-simulator/pull/1177> * Unify coeffarray_as_d and coeffarray_as_uint via union<https://github.com/nest/nest-simulator/pull/1243> * Add missing include of sys/time.h<https://github.com/nest/nest-simulator/pull/1273> * Fix threading issue when connecting<https://github.com/nest/nest-simulator/pull/1276> * Remove spurious thread_local_connectors update<https://github.com/nest/nest-simulator/pull/1333> * Fix rounding issue when setting small resolution<https://github.com/nest/nest-simulator/pull/1356> * Improve information given by error messages typically triggered by Connect<https://github.com/nest/nest-simulator/pull/1399> Infrastructure * Add tests for libnestutil/streamers.h<https://github.com/nest/nest-simulator/pull/1219> * Make version information consistent<https://github.com/nest/nest-simulator/pull/1223> * Update FindLibNeurosim to take Python version into account<https://github.com/nest/nest-simulator/pull/1235> * Remove the remaining markdown config in docs<https://github.com/nest/nest-simulator/pull/1263> * Skip deployment in Travis CI testsuite when not running a build<https://github.com/nest/nest-simulator/pull/1300> * Deploy build artifacts only when the build flag is set in the reply section<https://github.com/nest/nest-simulator/pull/1302> * Change the deployment branch to master<https://github.com/nest/nest-simulator/pull/1304> * Fix cppcheck usage in Travis CI testsuite<https://github.com/nest/nest-simulator/pull/1307> * Switch to GCC8 as default in continuous integration tests on Travis<https://github.com/nest/nest-simulator/pull/1310> * Fix formatting in test_stdp_nn_synapses.py<https://github.com/nest/nest-simulator/pull/1311> * Add security guidelines<https://github.com/nest/nest-simulator/pull/1329> * Moving to Python3.x on OsX<https://github.com/nest/nest-simulator/pull/1335> * Replace Python version by newest available on Travis<https://github.com/nest/nest-simulator/pull/1342> PyNEST * Fix warnings when Cythonizing pynestkernel.pyx<https://github.com/nest/nest-simulator/pull/1322> * Allow installation with Python 3.8<https://github.com/nest/nest-simulator/pull/1340> -- Prof. Dr. Hans Ekkehard Plesser Head, Data Science Section Faculty of Science and Technology Norwegian University of Life Sciences PO Box 5003, 1432 Aas, Norway Phone +47 6723 1560 Email hans.ekkehard.plesser(a)nmbu.no Home http://arken.nmbu.no/~plesser

1 0

Issue with NEST 2.18.0/python 3.6
by Angeliki Papadimitriou 20 Jan '20

20 Jan '20

Hello, I have an issue regarding random generation in nest version 2.18 with Python3.6. I attach a small python script that replicates my issue (less than 50 lines). In short, I am trying to create two Poisson generators and connect them to the same neuron. I noticed that if I reverse the order by which these Poisson generators are created (using the nest.Create()) function, then I get a different membrane potential response over time. In the code, noise_exc is created before noise_inh. If that order is reversed, the plot is different. My hunch is that this has to do with how nest generates random numbers. So I tried to force the creation of Poisson generators by providing a seed (lines 15 and 18). However this behavior persists. Do you have any insights as to why this happens? At the end of the script (lines 32-43) I provide a trivial case of the desired behavior I am trying to replicate. Thank you for your time Angeliki -- [image: Kth Logo] Angeliki Papadimitriou Research EngineerKTH Royal Institute of Technology *School of Electrical Engineering and Computer Science (EECS)**Division of Computational Science and Technology (CST)* Computational Brain Science Unit Room 4438, Floor 4, Lindstedtsvägen 5 11428 Stockholm, Sweden angpap(a)kth.se <namn(a)kth.se>

2 2

Open NEST Developer Video Conference Monday 20 January 2020 11:30 CET (UTC+1)
by Hans Ekkehard Plesser 19 Jan '20

19 Jan '20

Dear NEST Users & Developers! I would like to invite you to this years first Open NEST Developer Video Conference, tomorrow Monday 20 January, 11.30-12.30 CET (UTC+1). As usual the agenda for this meeting is also available online, see https://github.com/nest/nest-simulator/wiki/2020-01-20-Open-NEST-Developer-… For details how to log in see below. Agenda * Welcome * Preparing NEST 2.20 release * Preparing merge of nest-3 branch to master * Review of NEST User Mailing List * Review of open Github Pull Request * Review of open Github Issues Looking forward to seeing you soon! Hans Ekkehard Plesser ------------------ Log-in information ------------------ We use a virtual conference room provided by DFN (Deutsches Forschungsnetz). You can use the web client to connect. We however encourage everyone to use a headset for better audio quality or even a proper video conferencing system (see below) or software when available. Web client * Visit https://conf.dfn.de/webapp/conference/97938800 * Enter your name and allow your browser to use camera and microphone * The conference does not need a PIN to join, just click join and you're in. In case you see a dfnconf logo and the phrase "Auf den Meetingveranstalter warten", just be patient, the meeting host needs to join first (a voice will tell you). VC system/software How to log in with a video conferencing system, depends on you VC system or software. - Using the H.323 protocol (eg Polycom): vc.dfn.net##97938800 or 194.95.240.2##97938800 - Using the SIP protocol:97938800@vc.dfn.de - By telephone: +49-30-200-97938800 For those who do not have a video conference system or suitable software, Polycom provides a pretty good free app for iOS and Android, so you can join from your tablet (Polycom RealPresence Mobile, available from AppStore/PlayStore). Note that firewalls may interfere with videoconferencing in various and sometimes confusing ways. For more technical information on logging in from various VC systems, please see http://vcc.zih.tu-dresden.de/index.php?linkid=1.1.3.4 _______________________________________________ NEST Users mailing list -- users(a)nest-simulator.org To unsubscribe send an email to users-leave(a)nest-simulator.org

1 0

2025

2024

2023

2022

2021

2020

2019

NEST Users